Claude Code 2.1.295
2026-10-09 릴리스 · 변경 항목 143개 · 요약된 항목 142개
! breaking 2개
-
기본적으로 MCP 프로토콜 버전 2026-07-28을 협상하도록 변경하며, `MCP_PROTOCOL_NEGOTIATION=legacy` 옵션으로 이를 방지한다
# MCP·플러그인
원문
[What's changed] Changed claude.ai connectors to negotiate MCP protocol version 2026-07-28 by default on installs that fetch no flags; `MCP_PROTOCOL_NEGOTIATION=legacy` opts out
-
셀프 호스팅 러너에서 세션 환경변수로 `CCR_AUTO_MODE_ALLOW`, `CCR_AUTO_MODE_ENVIRONMENT`, `CCR_AUTO_MODE_SOFT_DENY`를 전달하지 않도록 변경한다
# 보안·권한
원문
[What's changed] Self-hosted runner: Changed the runner to stop passing `CCR_AUTO_MODE_ALLOW`, `CCR_AUTO_MODE_ENVIRONMENT` and `CCR_AUTO_MODE_SOFT_DENY` into a session's environment
+ 신기능 33개
-
모든 Claude 앱 게이트웨이 업스트림에 선택적 `models` 목록을 추가하여, 페일오버 시에도 목록에 있는 모델만 전송되도록 한다
# MCP·플러그인
원문
[What's changed] Added an optional `models` list to every Claude apps gateway upstream: only the listed models are sent there, on failover too, and one `*` in an entry is a wildcard
-
명령 및 HTTP 훅에서 시작할 수 없거나, 타임아웃되거나, 예상치 못한 코드로 종료되는 경우 동작을 차단하는 `onFailure: "block"`을 추가한다
# 훅
원문
[What's changed] Added `onFailure: "block"` for command and HTTP hooks: a hook that can't start, times out, or exits with an unexpected code blocks the action instead of letting it through
-
터미널이 Claude Code의 작동 상태를 표시할 수 있도록 Program Status Protocol (OSC 7501) 지원을 추가한다
# UI
원문
[What's changed] Added Program Status Protocol (OSC 7501) support: terminals that implement it can show whether Claude Code is working, waiting on you, or done
-
Claude apps gateway의 Bedrock, Vertex, Foundry 및 기타 클라우드 업스트림에서 `timeouts.upstream_ttfb_ms`를 지원한다
# 성능
원문
[What's changed] Added support for `timeouts.upstream_ttfb_ms` on the Claude apps gateway's Bedrock, Vertex, Foundry and other cloud upstreams: a value you set now limits how long a stream may take to start there, after which it fails over or gets a 502
-
`←`가 현재 도구를 실행하는 동안 턴을 중단할 때 "Backgrounding cancelled" 메시지를 표시한다
# UI
원문
[What's changed] Added a "Backgrounding cancelled" message when you stop the turn while `←` is waiting for the current tool to finish
-
관리형 설정이 없는 기기에서 `forceLoginMethod: "gateway"`와 `forceLoginGatewayUrl` 설정을 지원하여 `/login` 시 Claude 앱 게이트웨이로 연결되도록 한다
# 보안·권한
원문
[What's changed] Added support for `forceLoginMethod: "gateway"` and `forceLoginGatewayUrl` in your own user settings on machines with no managed settings, so `/login` opens on that Claude apps gateway
-
Claude 앱 게이트웨이의 `inference` 감사 이벤트에 `upstream_request_id`를 추가한다
# 보안·권한
원문
[What's changed] Added `upstream_request_id` to the Claude apps gateway's `inference` audit event: the request ID from Amazon Bedrock, the Anthropic API or another upstream, for support cases
-
모드(mods)를 위한 `$.ui.notify`를 추가하여 사용자 알림 설정을 통해 알림을 표시한다
# UI
원문
[What's changed] Added `$.ui.notify` for mods: raises a native notification through your own notification setting and says which channel sent it
-
모드(mod)의 `Button`에 `string`과 `Text`를 자식으로 추가하여, 리스트의 한 행이 칩이나 흐릿한 상세 정보가 포함된 하나의 클릭 가능한 영역이 되도록 한다
# UI
원문
[What's changed] Added children to a mod's `Button`: strings and `Text`, so a row of a list is one pressable with a chip or a dim detail inside
-
429 및 529 오류 발생 시 대기 시간 제한을 설정하는 `CLAUDE_CODE_RETRY_WATCHDOG_MAX_WAIT_MS` 환경변수를 추가한다
# 성능
원문
[What's changed] Added `CLAUDE_CODE_RETRY_WATCHDOG_MAX_WAIT_MS` to limit how long unattended retry mode (`CLAUDE_CODE_RETRY_WATCHDOG`) waits out 429 and 529 errors
-
Claude 앱 게이트웨이의 성공적인 추론 응답에 `request-id` 헤더를 추가하여 텔레메트리에서 게이트웨이 감사 로그와 일치하도록 한다
# 보안·권한
원문
[What's changed] Added a `request-id` header to the Claude apps gateway's successful inference responses, so `request_id` in Claude Code telemetry matches the gateway's audit log
-
Amazon Bedrock의 Claude 앱 게이트웨이에서 `/context` 및 대용량 파일 읽기 시 토큰 수를 계산하는 방식을 AWS의 CountTokens API를 사용하도록 개선한다
# 성능
원문
[What's changed] Improved token counts behind a Claude apps gateway on Amazon Bedrock, which `/context` and large file reads use: the gateway now gets them from AWS's CountTokens API instead of a one-token model request. Grant `bedrock:CountTokens` to use it
-
Claude apps gateway 뒤의 백그라운드 요청에 세션 모델 대신 Haiku 4.5를 우선적으로 사용하도록 개선한다
# 에이전트
원문
[What's changed] Improved background requests behind a Claude apps gateway to use Haiku 4.5 instead of the session's model, falling back to the session's model where the gateway does not serve Haiku 4.5
-
Amazon Bedrock 지역에서 목록에 없는 모델을 처리하는 방식을 개선하여, 거부 시 추가할 모델명을 명시한다
# MCP·플러그인
원문
[What's changed] Improved how the Claude apps gateway handles models not listed under `models:` in Amazon Bedrock regions outside AWS's US geography. AWS always refused those requests; the gateway now tries the model in your own region, and a refusal names the model to add
-
대용량 파일 전송 실패 시, Claude에게 파일 크기를 줄이는 대신 실패를 보고하도록 안내를 개선한다
# 에이전트
원문
[What's changed] Improved what Claude is told when a large file it sends fails to upload with no reason given, so it reports the failure instead of shrinking the file
-
모델이 도구 검색을 통해 로드하는 MCP 도구 설명의 제한을 16,384자로 늘린다
# MCP·플러그인
원문
[What's changed] Changed MCP tool descriptions the model loads through tool search to be cut at 16,384 characters instead of 2,048
-
서브에이전트가 `skills` 필드에서 최대 32개의 기술을 미리 로드하도록 변경한다
# 에이전트
원문
[What's changed] Changed subagents to preload at most 32 skills from the `skills` field, each once; a subagent with the Skill tool can still invoke the rest
-
모듈이 도구 호출을 거부할 때 Claude와 사용자가 읽는 내용을 수정한다
# MCP·플러그인
원문
[What's changed] Changed what Claude and you read when a mod denies a tool call after the tool ran: it now says the tool ran and a plugin withheld its result
-
Enterprise Grid 워크스페이스에서 채널을 공유할 때 Claude의 알림을 한 달에 한 번만 발생하도록 변경한다
# 보안·권한
원문
[What's changed] [Claude Tag] Changed Claude's notice that a channel shared across Enterprise Grid workspaces uses organization defaults to post only when someone mentions Claude, at most once a month
-
채널 관리자 추가 시 해당 멤버를 Custom roles로 이동시켜 다른 권한을 제거할 수 있는 상황에 대해 관리자 설정에서 확인 절차를 추가한다
# 보안·권한
원문
[What's changed] [Claude Tag] Added a confirmation in Claude Tag admin settings before adding a channel manager moves that member to Custom roles, which can remove their other access
-
`/copy` 선택기에서 따옴표로 묶인 텍스트를 추가하여, 작성된 메시지가 `>` 표시와 함께 복사되지 않도록 한다
# UI
원문
[What's changed] Added quoted text to the `/copy` picker, so a drafted message copies without its `>` markers
-
설정 파일이 로드되지 않을 때 `claude plugin install`, `enable`, `disable` 및 `marketplace add` 명령에 경고를 추가한다
# 보안·권한
원문
[What's changed] Added a warning to `claude plugin install`, `enable`, `disable` and `marketplace add` when the settings file they write to does not load
-
터미널인 경우, `claude -p` 실행이 마지막 턴 이후에도 열려 있을 때 무엇을 기다리는지 stderr에 한 줄을 추가한다
# UI
원문
[What's changed] Added a line on stderr, when it is a terminal, that says what a `claude -p` run is waiting for when it stays open after its last turn
-
README에 설치 명령이 없는 플러그인의 `claude plugin validate` 실행 시 안내 문구를 추가한다
# MCP·플러그인
원문
[What's changed] Added advice to `claude plugin validate` when a plugin's README has no install line: it prints the line to paste and never changes the exit code, even with `--strict`
-
Claude 앱 게이트웨이의 PostgreSQL 데이터베이스가 읽기 전용일 때 30초마다 경고를 로그에 남기며 실패 원인과 복구 방법을 알린다
# 성능
원문
[What's changed] Improved the Claude apps gateway to log a warning every 30 seconds while its PostgreSQL database is read-only, saying what fails and how to recover
-
headless `rate_limit_event` 사용량 제한 경고에 계정의 추가 사용량 활성화 여부를 포함한다
# UI
원문
[What's changed] Improved headless `rate_limit_event` usage-limit warnings to say whether the account has extra usage turned on
-
내장 `plugin-authoring` 스킬을 개선하여 터미널이 없는 세션에서 터미널 명령을 실행하라고 하지 않으며, 모듈 공유를 요청받았을 때만 설명한다
# MCP·플러그인
원문
[What's changed] Improved the built-in `plugin-authoring` skill: it no longer tells a session with no terminal to run terminal commands, and explains sharing a mod only when asked
-
Grep 입력 처리 방식을 개선하여 `-l`, `-c`, `-r` 플래그와 함께 전송된 검색을 성공적으로 실행한다
# MCP·플러그인
원문
[What's changed] Improved Grep input handling: a search sent with grep's `-l`, `-c` or `-r` flag now runs instead of failing the call
-
Workflow 도구의 `scriptPath` 거부 시, Read 도구가 없는 세션에서 작동하는 경로인 `script`를 통해 인라인으로 전달하도록 안내한다
# 에이전트
원문
[What's changed] Improved the Workflow tool's `scriptPath` refusal: it now says to pass the script inline via `script`, the route that works in sessions without a Read tool
-
배경색이 없는 Artifact 페이지를 오프화이트 대신 화이트로 표시한다
# UI
원문
[What's changed] Changed Artifact pages with no background of their own to show on white instead of off-white
-
[VSCode] Claude가 보낸 파일에 대한 채팅 행을 추가하고 파일 이름을 클릭하여 에디터에서 열 수 있게 한다
# UI
원문
[What's changed] [VSCode] Added a chat row for files Claude sends you: click a file's name to open it in the editor; Claude's caption shows underneath, and the row stays visible in Focus view
-
클라우드 환경 폼의 설정 스크립트 박스 크기를 조절하고 높이를 늘려 가독성을 높인다
# UI
원문
[What's changed] [Cloud sessions] Improved the setup script box in the cloud environment form: it starts taller, grows with your script, and can be resized by dragging
-
Slack 채널에 게시되는 설정 확인 카드의 유지 시간을 10분에서 30분으로 늘린다
# UI
원문
[What's changed] [Claude Tag] Changed the settings confirmation cards Claude posts in a Slack channel to stay open for 30 minutes instead of 10
~ 수정 107개
-
`--tools` 및 `--restricted` 옵션이 실행 후 등록되는 내장 도구에 적용되지 않거나, 폐기된 도구 이름이 호출자의 도구 세트 외부로 도달하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed `--tools` and `--restricted` not applying to built-in tools that register after launch, and deprecated tool names reaching tools outside the caller's tool set
-
백그라운드에서 이동한 MCP 툴 호출에 대한 알림이 짧은 작업 ID를 표시하도록 수정한다
# UI
원문
[What's changed] Fixed the notification for an MCP tool call that moved to the background showing a shortened task id
-
Skill 도구가 응답 스트림이 끝나기 전에 종료될 때 Skill의 `allowed-tools`와 `effort`가 누락되는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed a skill's `allowed-tools` and `effort` being dropped when the Skill tool finished before the response stream ended, which denied the skill's Bash commands in `-p` runs
-
파일 내용이 변경되었으나 수정 시간이 갱신되지 않았을 때 Edit 기능이 해당 파일을 완전히 읽은 것으로 처리하는 문제를 수정한다
# UI
원문
[What's changed] Fixed Edit treating a file as fully read when its contents changed without its modification time advancing
-
게이트웨이, Bedrock, Vertex 또는 Foundry가 context-1m 베타를 거부할 때 모든 요청이 실패하던 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed every request failing on a `[1m]` model when a gateway, Bedrock, Vertex or Foundry refuses the context-1m beta; Claude Code now resends without it
-
`claude -p`의 텍스트 출력이 배경 작업이 시작될 때 이전 응답을 누락하는 문제를 수정한다
# UI
원문
[What's changed] Fixed `claude -p` text output dropping earlier responses when background work started another turn; each turn's response now prints when the turn ends
-
헤드리스 및 SDK 세션에서 연결이 끊긴 원격 MCP 서버가 재연결 루프를 돌거나 너무 자주 재연결을 시도하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed remote MCP servers in headless and SDK sessions staying disconnected after an outage longer than 15 seconds, or reconnecting in a tight loop to a server that drops each connection right after it connects; repeated drops now back off, up to 30s
-
서버의 오류 응답에 네트워크 오류 이름이 포함된 경우 원격 MCP 연결이 끊어지는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed remote MCP connections being dropped when a server's error reply happened to contain a network error name
-
페이지네이션 커서를 반복하는 MCP 서버가 연결 시마다 동일한 페이지를 최대 20회 요청받는 것을 방지한다
# MCP·플러그인
원문
[What's changed] Fixed MCP servers that repeat a pagination cursor being asked for the same page up to 20 times at every connect
-
MCP 도구에 의해 반환된 CSS, JavaScript, XML 파일이 .bin으로 저장되어 Read 도구가 거부하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed CSS, JavaScript and XML files returned by MCP tools being saved as .bin, which the Read tool refuses; font and icon files now get their own extension too
-
모델이 `description` 대신 `command_description`을 전달할 때 Bash 도구 호출이 실패하는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed Bash tool calls failing when the model passes `command_description` instead of `description`
-
Chrome에서 `host:80`으로 작성된 사이트 거부 규칙이 해당 호스트의 일반 `http://` 페이지에 적용되지 않던 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed Claude in Chrome not applying a site deny rule written with port 80 (`host:80`) to plain `http://` pages on that host
-
`/plugin`의 Errors 탭에서 로드 실패한 마켓플레이스를 제거하고 플러그인을 삭제할 때 먼저 물어보지 않고 Enter를 누를 때 발생하던 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed `/plugin`'s Errors tab removing a marketplace that failed to load, and uninstalling its plugins, on Enter without asking first
-
플러그인 설치가 불가능한 이름의 마켓플레이스를 `claude plugin marketplace add`로 추가할 때 성공으로 보고되는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed `claude plugin marketplace add` reporting success for a marketplace whose name no plugin can be installed under; such an add is now refused
-
`CLAUDE_AUTO_BACKGROUND_TASKS` 설정 시 서브에이전트가 완료되기 전에 뒤에 대기 중인 명령을 실행해버리는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed `CLAUDE_AUTO_BACKGROUND_TASKS` moving a subagent to the background while an edit or shell command waited behind it, which started that call before the subagent finished
-
`claude remote-control` 세션에서 전화 메시지 직후에 PushNotification이 전송되지 않았다고 표시되는 문제를 수정한다
# UI
원문
[What's changed] Fixed PushNotification saying a push was not sent in `claude remote-control` sessions right after a phone message, without the `/config` toggle, or when started from inside Claude Code
-
원격 세션에서 한 번에 256개 이상의 파일을 전송할 때 'vouched for' 되지 못했다는 오류로 거부되는 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed files sent from remote sessions being refused as "could not be vouched for" when more than 256 were sent at once
-
Claude 앱 게이트웨이로 로그인한 세션에서 `availableModels`에 나열된 Fable 모델이 `/model` 선택기에서 나타나지 않던 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed Fable models listed in `availableModels` not appearing in the `/model` picker for sessions signed in to a Claude apps gateway; such a model now shows its built-in row in place of a `modelPicker` row added for the same model
-
Claude apps gateway의 admin spend 뷰에서 세션이 그룹을 더 이상 포함하지 않음에도 개발자의 이전 그룹과 그룹 한도를 표시하던 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed the Claude apps gateway's admin spend view showing a developer's old groups and group cap after their session stopped carrying groups
-
`CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC` 설정 시 `/usage`와 상태줄에서 Claude apps gateway spend limit을 숨기는 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed `CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC` hiding the Claude apps gateway spend limit in `/usage` and the status line. The spend limit request goes to the gateway the session is signed in to
-
자체 링크된 워크트리 내의 서브에이전트에게 부모 세션의 git 브랜치, 상태 및 최근 커밋을 보여주는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed subagents in their own linked worktree being shown the parent session's git branch, status and recent commits
-
모듈의 훅이 내용이 잘린 깊은 중첩된 도구 입력을 전달받아 가드가 내용을 확인하지 못한 채 통과시키는 문제를 수정한다
# 훅
원문
[What's changed] Fixed a mod's hook being handed a deeply nested tool input cut short with no error, so a guard could pass content it never saw
-
백그라운드 세션에서 `FORCE_COLOR=3`가 출력에 컬러 이스케이프 코드를 포함하게 하여 Claude가 읽는 내용에 포함되는 문제를 수정한다
# UI
원문
[What's changed] Fixed commands and hooks in background sessions inheriting `FORCE_COLOR=3`, which put color escape codes into the output Claude reads
-
세션이 열려 있는 상태에서 두 서비스가 모두 중단될 때 `claude agents`가 새로운 백그라운드 서비스를 시작하는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed `claude agents` starting a new background service as it exited when both were stopped with a session open (for example at a reboot), which could delay shutdown and restart an interrupted session
-
작업 패널이나 연결된 클라이언트에서 긴 실행 중인 MCP 도구 호출을 중단할 때 Claude에게 알리지 않는 문제를 수정한다
# UI
원문
[What's changed] Fixed Claude not being told when you stop a long-running MCP tool call from the tasks panel or a connected client
-
백그라운드 세션의 프로세스가 꺼져 있을 때 다음 웨이크업 시점이 되어 `/loop`가 예고 없이 멈추는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed a background session's `/loop` stopping without notice when its next wakeup came due while the session's process was down; the session now says so and Claude is told
-
응답이 수만 줄에 달할 때 터미널이 멈추고 ctrl+c가 무시되는 현상을 수정한다
# UI
원문
[What's changed] Fixed the terminal freezing, with ctrl+c ignored, when a response ran to tens of thousands of lines
-
세션이 종료 후 재개될 때, Claude가 배경 서브에이전트를 SendMessage로 재개할 수 있음을 알지 못하는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed Claude not being told it can resume background subagents with SendMessage after a session was killed and resumed a second time
-
`/model` , `/fast` , 그리고 `/output-style`이 플러그인 `config.set` 훅을 거치지 않고 설정을 저장하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed `/model`, `/fast` and `/output-style` saving their setting without asking a plugin's `config.set` hook
-
인용문이 몇 줄마다 더 깊게 중첩되는 응답이 터미널을 몇 초간 멈추게 하고 기가바이트 단위의 메모리를 사용하는 문제를 수정한다
# UI
원문
[What's changed] Fixed replies whose quotes nest deeper every few lines freezing the terminal for seconds and using gigabytes of memory
-
`claude mcp serve`의 백그라운드 Bash 결과가 출력 파일 이름을 지정하지 않고, 도구 설명에 약속된 알림이 오지 않는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed `claude mcp serve` background Bash results not naming the output file, and its tool description promising a notification that never arrives
-
SessionStart 훅이 `CLAUDE_ENV_FILE`에 쓰는 변수가 인앱 `/resume` 또는 `/branch` 이후 Bash 도구에 도달하지 않는 문제를 수정한다
# 훅
원문
[What's changed] Fixed variables a SessionStart hook writes to `CLAUDE_ENV_FILE` not reaching the Bash tool after an in-app `/resume` or `/branch`
-
서버 관리 설정의 캐시가 변조되어 개인 플러그인이 조직 관리로 인식되는 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed a tampered cache of server-managed settings making a person's own plugin count as organization-managed on machines whose managed settings list or enable plugins
-
피처 플래그가 없는 환경에서 Claude 3 Opus 및 Claude 3.x Sonnet 세션이 거부되는 도구 검색을 제안받는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed Claude 3 Opus and Claude 3.x Sonnet sessions being offered tool search, which those models reject, where feature flags are unavailable
-
SDK 호스트가 응답 전 질문을 닫아버려 세션 전체에서 모드 핫 리로딩이 꺼지는 문제를 수정하며, 이제 질문을 최대 세 번까지 반복해서 묻는다
# 에이전트
원문
[What's changed] Fixed mod hot-reloading turning off for the whole session when an SDK host closed its enable question before anyone answered; the question is now asked up to three times
-
Windows 줄바꿈(CRLF)이 포함된 짧은 명령 출력 결과가 한 줄에 표시되는 문제를 수정한다
# UI
원문
[What's changed] Fixed short command output with Windows line endings (CRLF) being drawn on a single line
-
되돌리기(rewind) 후 재개 시 중단된 예약된 작업이 다시 나타나거나, Esc 또는 압축(compaction) 후의 되돌리기가 이어질 때 예약된 작업이 사라지는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed a stopped scheduled task coming back on resume after a rewind, and a scheduled task being lost on resume after Esc or a rewind following a compaction
-
매우 긴 줄, 연속된 빈 줄, 또는 닫히지 않은 문자열과 heredoc이 포함된 코드를 구문 강조할 때 터미널이 일시적으로 멈추는 현상을 수정한다
# UI
원문
[What's changed] Fixed the terminal freezing for seconds or minutes while syntax highlighting code with very long lines, long runs of blank lines, or unclosed strings and heredocs
-
설정에서 `disableAutoMode`가 제거된 후 Desktop 및 SDK 세션이 재시작 전까지 자동 모드로 전환되지 않던 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed Desktop and SDK sessions refusing to switch back to auto mode until restart after `disableAutoMode` was removed from settings
-
세션이 백그라운드로 이동되거나 종료 후 재개될 때, `/rewind` 이후의 프롬프트가 사라지고 삭제된 턴이 다시 나타나는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed the prompt sent after a `/rewind` being lost, and the removed turns coming back, when the session was moved to the background or resumed after being killed
-
모듈의 `session.receive` 훅이 메시지 전달 전 권한을 요청할 때 클라우드 세션이 멈추는 현상을 수정한다
# 훅
원문
[What's changed] Fixed cloud sessions hanging when a mod's `session.receive` hook asked for permission before passing a message on
-
headless 및 SDK 세션에서 `setMcpServers()`로 설정된 서버를 다시 나열할 때 MCP 로그인이나 재연결이 늦게 완료되는 현상을 수정한다
# MCP·플러그인
원문
[What's changed] Fixed an MCP sign-in or reconnect that finishes late in headless and SDK sessions relisting a server set with `setMcpServers()` as your own
-
macOS에서 세션이 홈 폴더 또는 그 상위 폴더에서 시작될 때 파일 개수가 다른 앱의 데이터에 도달하여 '다른 앱의 데이터 접근' 프롬프트가 뜨는 현상을 수정한다
# 보안·권한
원문
[What's changed] macOS: Fixed a file count at session start that could reach other apps' data and raise the "access data from other apps" prompt when a session starts in the home folder or above it
-
텔레메트리 비활성화 시 Artifact 도구의 권한 프롬프트 횟수를 줄여 동일하게 맞춘다
# 보안·권한
원문
[What's changed] Changed the Artifact tool's permission prompts with telemetry disabled to the same five questions other installs get, instead of asking before each read of someone else's artifact and each data edit
-
텔레메트리 비활성화 시 개인 Artifact를 게시하고 업데이트할 때 프롬프트 없이 진행되도록 수정한다
# 보안·권한
원문
[What's changed] Changed scheduled and Run now routine runs in installs with telemetry disabled to publish new private artifacts, and update your own, without asking, as in other installs
-
WebSocket (`ws`) MCP 서버에서 16 MiB 이상의 메시지를 파싱하지 않고 연결을 종료하도록 제한을 맞춘다
# MCP·플러그인
원문
[What's changed] Changed WebSocket (`ws`) MCP servers: a message over 16 MiB is no longer parsed and closes the connection, the limit the other transports already have
-
동시에 두 개의 Claude 뷰가 보일 때 키보드 포커스가 튀는 현상을 수정한다
# UI
원문
[What's changed] [VSCode] Fixed keyboard focus bouncing between two Claude views visible at once, which could send typed text to the wrong conversation
-
대용량 리포지토리에서 git fetch가 끊기는 현상을 `CLAUDE_RUNNER_FETCH_SERVER_PROGRESS_CAP_MS` 설정으로 해결한다
# 성능
원문
[What's changed] Self-hosted runner: Fixed git fetches being cut off while the git server was still reporting progress on a large repository; `CLAUDE_RUNNER_FETCH_SERVER_PROGRESS_CAP_MS` tunes or turns off the wait
-
클라우드 세션을 압축 해제한 직후에 보낸 메시지가 응답이 없는 경우를 수정한다
# 에이전트
원문
[What's changed] [Cloud sessions] Fixed a message sent right after unarchiving a cloud session sometimes getting no reply because no container could start for it
-
일부 오래된 루틴이 저장된 프롬프트를 전달하지 않고 실행되는 문제를 수정한다
# 에이전트
원문
[What's changed] [Cloud sessions] Fixed some older routines starting their runs without ever giving Claude their saved prompt; those routines now run their prompt again
-
Claude가 태그되지 않은 메시지를 읽지 않는 바쁜 채널에서 다른 앱이나 봇의 메시지가 응답되지 않는 문제를 수정한다
# 에이전트
원문
[What's changed] [Claude Tag] Fixed another app's or bot's @Claude going unanswered in a busy channel where Claude had stopped reading untagged messages
-
Code Review 재검토 시 이전 결과가 아직 열려 있는 상태에서 문제가 없다고 말하는 것을 수정하고, 남은 개수를 표시한다
# 에이전트
원문
[What's changed] [Code Review] Fixed Code Review re-reviews saying no issues were found while earlier findings were still open; the comment now says how many remain open
-
풀 요청이 `CLAUDE.md` 파일을 수정할 때 Code Review가 여전히 큰 `CLAUDE.md`의 규칙을 건너뛰는 문제를 수정한다
# 에이전트
원문
[What's changed] [Code Review] Fixed Code Review still skipping a large CLAUDE.md's rules when the pull request edits that file
-
`xhigh` 및 `max` 노력 수준에서 웹 검색 및 `agent` 훅 평가가 훨씬 더 오래 걸리는 문제를 수정한다
# 성능
원문
[What's changed] Fixed web searches and `agent` hook evaluations taking much longer at `xhigh` and `max` effort
-
로그인 리프레시 직후 시작 시 관리형 설정이 로드되지 않는 드문 오류를 수정한다
# 보안·권한
원문
[What's changed] Fixed a rare failure to load managed settings at startup right after a login refresh
-
Claude Code를 다시 시작할 수 없을 때 `/tui`가 메시지 없이 또는 시스템 오류와 함께 종료되는 문제를 수정한다
# UI
원문
[What's changed] Fixed `/tui` exiting without a message, or with a raw system error, when Claude Code could not be started again
-
답변에 적용된 스타일로 인해 텍스트로 표시된 링크 주소가 숨겨지는 문제를 수정한다
# UI
원문
[What's changed] Fixed a link address shown as text being hidden by a colour or conceal style a reply left on, including where it wraps in a table or a question preview
-
프롬프트에 텍스트를 입력할 때 `←`로 백그라운드 처리를 취소하면 Claude가 현재 도구 실행을 종료하는 대신 계속 실행되도록 수정한다
# UI
원문
[What's changed] Fixed Claude stopping at the end of the current tool when text typed in the prompt cancelled backgrounding with `←`; Claude now keeps working in the foreground
-
Claude가 MCP 서버의 리소스 목록을 기다리는 동안 인터럽트가 타임아웃 전까지 턴을 종료하지 않던 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed an interrupt not ending the turn until a timeout while Claude waited for an MCP server's resource list
-
대기 중인 웨이크업을 취소할 때 알림을 표시하도록 수정한다
# 훅
원문
[What's changed] Fixed Esc not stopping a self-paced `/loop` that was moved to the background with `←`; cancelling a pending wakeup now shows a notice
-
자동 모드 거부 알림 및 작업 상세 보기 활동 목록에서 `worker`라는 이름의 커스텀 에이전트를 "Agent"로 표시하던 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed a custom agent named `worker` being shown as "Agent" in auto-mode denial notices and in the activity lists of task detail views
-
글로브 패턴에 대한 for-loop의 Bash 권한 체크를 수정하여 권한 체크 정확도를 높인다
# 보안·권한
원문
[What's changed] Fixed Bash permission checks for for-loops over glob patterns, improving permission-check accuracy
-
Workflow 서브에이전트에서 호출된 포크된 스킬이 결과를 호출한 에이전트가 아닌 메인 대화로 전달하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed forked skills invoked from Workflow subagents delivering their results to the main conversation instead of the invoking agent
-
인프로세스 에이전트 팀원이 도구 검색을 통해 도구를 로드하기 전까지 첫 번째 SendMessage 호출에 실패하는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed in-process agent teammates failing their first SendMessage call until they loaded the tool through tool search
-
재개 시에 완료되지 않은 백그라운드 워크플로우가 `TaskStop`에 의해 중단되었을 수 있다는 잘못된 정보를 Claude에게 알리는 문제를 수정한다
# 에이전트
원문
[What's changed] Fixed Claude being told on resume that an unfinished background workflow may have been stopped by `TaskStop`, which can never be the cause
-
답변이나 팀원의 메시지에서 터미널 하이퍼링크 바이트가 숨겨진 주소와 함께 클릭 가능한 링크로 표시되는 문제를 수정한다
# UI
원문
[What's changed] Fixed raw terminal hyperlink bytes in a reply or a teammate's message being drawn as a clickable link with a hidden address
-
저장소가 큰 git 서브모듈을 포함하는 플러그인 마켓플레이스들이 추가되거나 갱신될 때, 플러그인 파일을 포함하는 서브모듈만 가져오도록 수정한다
# MCP·플러그인
원문
[What's changed] Fixed plugin marketplaces whose repository has large git submodules failing to add or refresh: only the submodules that hold plugin files are now fetched
-
`/advisor` 대화에서 더 이상 사용할 수 없는 저장된 어드바이저 모델에 체크 표시가 나타나는 것을 수정하고, "No advisor"에서 열리도록 한다
# 에이전트
원문
[What's changed] Fixed the `/advisor` dialog showing a checkmark on a saved advisor model that is no longer available; it now opens on "No advisor"
-
vim 모드에서 `~`가 줄의 마지막 문자를 지나쳐 커서가 이동하는 문제를 수정한다
# UI
원문
[What's changed] Fixed vim mode's `~` moving the cursor past the last character of a line, so `x` after it did nothing, and `3~` running on into the next line
-
macOS에서 복사한 악센트가 포함된 텍스트를 프롬프트 중간에 붙여넣을 때 커서가 한 글자 더 멀리 이동하는 문제를 수정한다
# UI
원문
[What's changed] Fixed the cursor landing one character too far after pasting accented text copied from macOS (such as a file name) into the middle of the prompt
-
플러그인 훅 워커 재시태 시 모듈이 다른 모듈의 가드 훅을 통과하는 문제를 수정한다
# 훅
원문
[What's changed] Fixed calls a mod makes while it reloads during a plugin hooks worker restart getting past another mod's guard hook that has a `.catch`; such calls are now refused
-
훅 모듈이 너무 깊은 수준에서 코드를 중첩하여 로드나 검증에 실패하는 문제를 수정한다
# 훅
원문
[What's changed] Fixed plugins whose hooks module nests code thousands of levels deep failing to load or validate with a bare stack-overflow message
-
`claude plugin test`가 실제 세션에서 유지되는 블록을 제거하는 `session.append` 훅을 통과하게 하는 문제를 수정한다
# 훅
원문
[What's changed] Fixed `claude plugin test` passing a `session.append` hook that removes tool call, tool result or thinking blocks that a real session keeps
-
Bash 명령어로 출력 없이 실행된 파일이 이미 읽힌 것으로 처리되는 문제를 수정한다
# 성능
원문
[What's changed] Fixed a file being treated as already read after a Bash command such as `cat` ran without printing it
-
`constructor` 또는 `prototype`으로 이름 지어진 플러그인 옵션이 항상 기본값으로 읽히고 수정 시 플러그린이 재로드되지 않는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed plugin options named `constructor` or `prototype` always reading as their default and never reloading the plugin when edited
-
`/reload-plugins` 또는 세션 시작 시 모드 파일 읽기가 진행되는 동안 모드 핫 리로드 시 저장된 내용이 누락되는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed a mod's hot reload missing a save made while `/reload-plugins` or session start was reading the mod's files
-
모드 핫 리로드 승인 시 답변을 선택하지 않고 승인하면 매 턴마다 핫 리로드 질문이 다시 나타나는 문제를 수정한다
# UI
원문
[What's changed] Fixed the mod hot-reloading question being asked again every turn for the whole session when it is approved without picking an answer
-
dim 텍스트 바로 뒤에 오는 굵은 텍스트가 파이프 출력에서 흐릿하게 표시되는 문제를 수정한다
# UI
원문
[What's changed] Fixed bold text being drawn faint in piped output when it directly follows dim text
-
모드(mod)의 핫 리로드 시 마지막 리로드 직전 몇 밀리초 내에 수행된 저장을 누락하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed a mod's hot reload missing a save made within a few milliseconds of its last reload, which left the mod on its old version until the next save
-
SessionStart 훅의 변경되지 않은 컨텍스트가 resume 시마다 대화에 다시 추가되는 문제를 수정한다
# 훅
원문
[What's changed] Fixed an async SessionStart hook's unchanged context being added to the conversation again on every resume
-
`-p` 및 SDK 세션에서 생성된 타입 파일이 `--plugin-dir` 플러그인 폴더에 쓰여지는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed generated type files being written into a `--plugin-dir` plugin's folder in `-p` and SDK sessions; they are now written only where a mod is being developed
-
탭이나 양방향 제어 문자가 포함된 텍스트가 화면 가장자리에서 잘리거나 인접한 행에 겹쳐 그려지는 것을 수정한다
# UI
원문
[What's changed] Fixed text with tabs or bidirectional control characters losing its end at the edge of the screen or drawing over nearby rows
-
`/model` 명령에서 Max 노력이 현재 세션에만 적용되지만 기본값으로 저장되었다고 표시되는 것을 수정한다
# 에이전트
원문
[What's changed] Fixed `/model` saying a Max effort pick was saved as your default for new sessions; Max applies to the current session only
-
비동기 훅의 JSON 출력이 여러 줄에 걸쳐 출력될 때 무시되는 것을 수정한다
# 훅
원문
[What's changed] Fixed an async hook's JSON output being ignored when it is printed over several lines
-
Read 도구가 빈 `pages` 파라미터를 생략된 것으로 처리하지 않고 거부하는 것을 수정한다
# MCP·플러그인
원문
[What's changed] Fixed the Read tool rejecting calls with an empty `pages` parameter instead of treating it as omitted
-
Windows 환경에서 드라이브 문자 대소문자 구분으로 인해 프로젝트 범위 플러그인이 로드되지 않는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed project-scope plugins not loading in VS Code on Windows due to drive-letter casing (anthropics/claude-code#74612)
-
Windows에서 드라이브 문자의 대소문자만 다른 경우, 프로젝트 또는 로컬 범위의 `plugin install` 및 `uninstall` 기록이 누락되거나 중복되는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed `plugin install` and `uninstall` at project or local scope on Windows missing the install record, or adding a second one, when only the drive letter's case differs
-
`←` 바로 뒤에 `↑` 또는 `Esc`를 눌러 프롬프트를 다시 불러올 때 큐에 있는 메시지가 사라지는 문제를 수정한다
# UI
원문
[What's changed] Fixed a queued message being lost when pulled back into the prompt with `↑` or `Esc` just after `←`: prompt history now keeps it
-
모드(mod)의 `prompt.submit` 훅이 재작성하거나 누락한 프롬프트가 여전히 입력 기록과 트랜스크립트의 큐 프롬프트 기록에 저장되는 문제를 수정한다
# 훅
원문
[What's changed] Fixed a prompt that a mod's `prompt.submit` hook rewrote or dropped still being saved as typed to prompt history and to the transcript's queued-prompt records
-
비대화형 세션에서 요청에 사용되지 않는 MCP 서버에 대한 인증이 필요한 경우 알림을 보내는 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed non-interactive sessions telling you about MCP servers that need authentication when your request doesn't use them
-
Claude apps gateway 로그인 시 `claude_code.auth` OpenTelemetry 로그인 이벤트를 전송하지 못하던 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed the `claude_code.auth` OpenTelemetry login event not being emitted on Claude apps gateway sign-in. The event is exported when OpenTelemetry is configured on the machine or the session is already signed in to the gateway
-
매우 큰 인터페이스를 추가하는 플러그인이 훅 워커가 멈출 때 다른 플러그인을 언로드하는 문제를 수정한다
# MCP·플러그인
원문
[What's changed] Fixed a plugin that adds very large interfaces getting another plugin unloaded when the plugin hooks worker stalls
-
중단된 `/ultrareview` 업로드로 인해 `~/.claude/seed-admin` 아래에 남겨진 임시 파일이 정리되지 않는 문제를 수정한다
# 보안·권한
원문
[What's changed] Fixed temporary files left under `~/.claude/seed-admin` by an interrupted `/ultrareview` upload never being removed by the retention cleanup
-
다른 세션에서 플러그인 업데이트를 동기화한 후, 긴 세션에서 claude.ai-synced 플러그인 훅이 "Plugin directory does not exist" 오류로 실패하는 현상을 수정한다
# 훅
원문
[What's changed] Fixed claude.ai-synced plugin hooks failing with "Plugin directory does not exist" in long-running sessions after another session synced a plugin update
-
macOS에서 업데이트 후 백그라운드 세션이 안정적인 앱 래퍼 외부에서 실행되어 폴더 접근 권한 프롬프트가 다시 나타나는 현상을 수정한다
# UI
원문
[What's changed] Fixed macOS background sessions that restart together after an update sometimes running outside the stable app wrapper, so folder-access prompts could reappear
-
플러그인 `config.set` 훅이 호출되기 전에 `/config`에서 자동 업데이트 채널을 변경하는 것이 저장되는 현상을 수정한다
# MCP·플러그인
원문
[What's changed] Fixed changing the auto-update channel in `/config` saving before a plugin's `config.set` hook was asked
-
권한 프롬프트 대기 중인 세션에 대해 Remote Control, claude.ai, 데스크톱 앱에서 MCP 도구 이름을 `mcp__server__tool` 식별자 대신 서버와 읽기 쉬운 이름으로 표시한다
# UI
원문
[What's changed] Improved the status shown in Remote Control, claude.ai and the desktop app for a session waiting on a permission prompt to name an MCP tool by its server and readable name instead of its `mcp__server__tool` identifier
-
`claude plugin validate` 및 플러그인 로딩 시, 훅 모듈이 재바인딩된 상위 `var`를 거부할 때 오류 메시지에 재바인딩 라인, 원인, 해결책을 포함한다
# MCP·플러그인
원문
[What's changed] Improved `claude plugin validate` and plugin loading: when a hooks module is refused over a rebound top-level `var`, the error now names the line that rebinds it, the cause, and a fix
-
백그라운드 세션의 대기 프롬프트에서 Ctrl+C를 눌렀을 때 `/loop` 깨우기 대기 상태를 유지하도록 수정한다
# UI
원문
[What's changed] Changed Ctrl+C at the idle prompt of an attached background session to leave a pending `/loop` wakeup alone, so pressing it twice detaches and the loop keeps running; press Esc to stop it
-
백그라운드 서비스가 없는 환경에서 `claude agents`가 중단될 때 실행 중인 세션이 약 1분간 유지되도록 수정한다
# 에이전트
원문
[What's changed] Changed `claude agents` stopped with its background service (macOS, or Linux without the service installed): running sessions now stop in about a minute unless it is run again, and a notice says so
-
탭 정지(tab stop)가 화면 왼쪽 가장자리 대신 텍스트 시작 위치에서부터 계산되도록 수정한다
# UI
원문
[What's changed] Changed tab stops to count from where a text starts instead of from the screen's left edge: an answer indented by 2 has its first stop 8 cells in, where it was 6
-
조직의 모드에서 오는 토스트 알림을 다른 모드보다 우선적으로 표시하도록 수정한다
# UI
원문
[What's changed] Changed toasts from your organization's mods to show ahead of other mods' toasts instead of waiting behind them
-
Claude 앱 게이트웨이가 경고와 함께 `desktop` 정책 키를 제공하도록 하여 새로운 Desktop 설정이 게이트웨이 업그레이드 없이도 작동하게 한다
# 보안·권한
원문
[What's changed] Changed the Claude apps gateway to start with a warning and serve a `desktop` policy key its bundled Claude Desktop schema doesn't know, so new Desktop settings need no gateway upgrade
-
[VSCode] 채팅 입력창에서 Ctrl+Shift+Tab, Cmd+Shift+Tab, Alt+Shift+Tab 키가 권한 모드를 전환하거나 Ctrl+Tab이 제안된 프롬프트를 수락하도록 하는 동작을 수정한다
# UI
원문
[What's changed] [VSCode] Fixed Ctrl+Shift+Tab, Cmd+Shift+Tab and Alt+Shift+Tab in the chat input also switching the permission mode, and Ctrl+Tab accepting the suggested prompt
-
클라우드 세션 연결이 끊겼을 때 누락된 활동이 한꺼번에 나타나도록 개선한다
# 성능
원문
[What's changed] [Cloud sessions] Improved how quickly a cloud session catches up after its connection drops: activity you missed now appears all at once instead of row by row
-
포크된 스레드의 "Continued from" 카드와 채널 링크가 원시 Slack 코드로 표시되는 문제를 수정한다
# UI
원문
[What's changed] [Claude Tag] Fixed channel links and @-mentions in a forked thread's "Continued from" card showing as raw Slack codes
-
`@Claude !restart` 명령으로 재시작이 확인된 후에도 Slack의 Working 상태가 계속 회전하는 현상을 수정한다
# UI
원문
[What's changed] [Claude Tag] Fixed Slack's Working status spinning on under a thread after `@Claude !restart` had already confirmed the restart
· 기타 1개
- [What's changed] [VSCode] Fixed "Fork conversation from here" and Rewind's conversation restore failing with "Message not found in session" after a background agent's activity or one of the panel's own status lines 요약 대기
AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.