AI 코딩 도구,
이번엔 뭐가 바뀌었나

• + 조직 제한으로 인해 리뷰가 건너뛰어질 때, 각 원인에 대한 관리자 페이지 링크를 포함하도록 개선한다
  원문

  [What's changed] [Code Review] Improved the check-run card and PR comment when a review is skipped because of an organization limit: each cause now links the admin page that fixes it

• + 메모리 사용량이 임계치에 도달했을 때 알림을 표시하고 메모리 확보 또는 안전한 재시작을 위한 단계를 안내한다 # 성능
  원문

  [What's changed] Added a visible warning when memory usage is critical, with steps to free memory or restart safely

• + 첫 번째 비대화형 턴에서 MCP 서버 연결을 기다리는 시간을 제한하는 `CLAUDE_CODE_MCP_STARTUP_WAIT_MS`를 추가한다 # MCP·플러그인
  원문

  [What's changed] Added `CLAUDE_CODE_MCP_STARTUP_WAIT_MS` to bound how long the first non-interactive turn waits for connecting MCP servers (`0` = don't wait)

• + Monitor 도구 알림을 개선하여 스크립트의 최종 출력과 종료 상태가 두 개의 알림 대신 하나로 합쳐져 모델 턴을 절약한다 # 성능
  원문

  [What's changed] Improved Monitor tool notifications: a script's final output and its exit now arrive as one notification instead of two, saving a model turn

• + claude.ai에 로그인하지 않았을 때 Artifact 도구 오류를 개선하여 터미널이 첫 시도에서 이를 알리고 Claude가 거부된 호출을 더 빨리 중단하도록 한다 # 보안·권한
  원문

  [What's changed] Improved Artifact tool errors: when you are not signed in to claude.ai the terminal now says so on the first attempt, and Claude is told to stop retrying a rejected call sooner

• + 더 오래된 버전의 페이지를 병합할 때 이전 버전으로 빌드된 publish를 전송하기 전에 중단하며 새 페이지를 병합한다 # 보안·권한
  원문

  [What's changed] Improved artifact publishing: a publish built on an older version is stopped before it is sent, with the newer page to merge

• + Claude apps gateway 부팅 시 첫 번째 Postgres 연결을 최대 세 번 시도하여 지연된 데이터베이스 연결을 허용한다 # 성능
  원문

  [What's changed] Improved Claude apps gateway boot: it now tries the first Postgres connection up to three times before exiting, so a database that is reachable a few seconds late no longer fails the boot

• + 부하 시 Claude apps gateway의 spend-limit 체크를 한 번의 데이터베이스 왕복으로 줄여 타임아웃을 줄인다 # 성능
  원문

  [What's changed] Improved the Claude apps gateway's spend-limit check under load: it now takes one database round trip instead of four, so fewer checks time out on a busy gateway

• + 설정된 값이 없는 모델에 대해 `/code-review`가 서브에이전트를 생성하는 대신 가벼운 인라인 리뷰 프롬프트를 사용하도록 변경한다 # 에이전트
  원문

  [What's changed] Changed `/code-review` to use leaner inline review prompts for every model that has no tuned settings of its own, instead of spawning many review subagents

• + 로컬 세션에서 artifact를 감시하는 방식을 변경한다 # 에이전트
  원문

  [What's changed] Changed artifact watching in local sessions: a new version published elsewhere no longer starts a turn; Claude learns of it from a later Artifact tool result

외 98개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Svelte 애플리케이션에서 HTML 태그 내의 주석을 지원한다 # UI
  원문

  We've added support for comments in HTML tags in Svelte applications (WEB-77758).

• + Figma Connect 도구 창의 Currently selected 섹션에 있는 빈 상태 텍스트를 명확하게 수정한다 # UI
  원문

  We've updated the empty-state text in the Currently selected section of the Figma Connect tool window for the sake of clarity (WEB-79021).

외 5개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 워크스페이스와 리포지토리 선택기를 통합하고 `sessions.chat.unifiedWorkspacePicker.enabled` 설정을 추가한다 # 에이전트
  원문

  [Agents] Unified workspace and repository picker (Experimental): Setting: sessions.chat.unifiedWorkspacePicker.enabled (Agents window only) Start agent work from one searchable list of local folders, GitHub repositories, Cloud repositories, and remote targets. Remote connection actions remain available from the Remote entry. Selecting Work in Repository uses a cloud-first workflow. A GitHub repository that is not already local is selected immediately with the Cloud harness, without a clone prompt. If you later choose a local harness, VS Code prompts you to clone the repository and preserves the cloud selection if you cancel.

• + Automations를 기본적으로 활성화하고 공유할 수 있게 기능을 추가한다 # 에이전트
  원문

  [Agents] Automations are now enabled by default and can be shared: Settings: chat.automations.enabled (Agents window only) Automations are now enabled by default, making it easier to streamline repetitive tasks. You can also export and import automations to share them across different environments or with your team. Learn more about Automations in the VS Code docs.

• + 로컬 Dev Containers에서 에이전트 세션을 실행할 수 있는 기능을 추가한다 # 에이전트
  원문

  [Agents] Run agent sessions in local Dev Containers: Setting: chat.agentHost.devContainer.enabled (Agents window only) Keep agent work aligned with your project's toolchain by running a session inside a local folder's Dev Container. The agent uses the environment and dependencies configured for the project instead of those on your local machine. When the setting is enabled, local folders with a supported Dev Container configuration automatically show a folder menu with a Use Dev Container action. Select the action to run the agent session in the folder's Dev Container. Docker must be installed on your machine. Note: Local Dev Container sessions are rolling out gradually, so the setting might not be enabled by default for you yet. You can enable the setting manually to try the feature now.

• + 에이전트 호스트에서 Codex 지원을 확장한다 # 에이전트
  원문

  [Agents] Expanded Codex support in the agent host: Settings: chat.agentHost.codexAgent.enabled , chat.editor.codex.preferAgentHost This release expands Codex support in the agent host, so you can keep the same coding session while changing where and how you work. If you are not signed in to GitHub Copilot and want to use the Codex harness just with your ChatGPT subscription, you also have to enable chat.agentHost.allowSignedOutWhenUsable . Continue across apps: move the same Codex session between the ChatGPT app and VS Code instead of starting a new conversation. Interact with desktop apps from VS Code: if the ChatGPT app is installed and configured for computer use, the Codex harness in VS Code can reuse that setup to interact with apps on your computer. This works with models from either your Copilot subscription or your ChatGPT subscription. Use VS Code tools: Codex can use the full set of t

• + 워크스페이스 내에서 Codex quick chats를 이어가는 기능을 추가한다 # 에이전트
  원문

  [Agents] Continue Codex quick chats in a workspace: Last release, we introduced continuing quick chats in a workspace for Copilot sessions. This release extends the same flow to Codex, so starting project-specific work no longer means abandoning a workspace-less Codex quick chat. Ask Codex to attach a local folder, then choose whether to use the folder directly or create an isolated worktree. After you confirm the change, the same chat and native Codex thread become a workspace session. The session retains its title, conversation history, current request, selected model, and permission mode. Codex then continues the request with access to the project files. Workspace conversion is available for idle Codex quick chats in Interactive mode and supports single-root workspace targets. If the change is canceled or cannot be applied, the original workspace-less chat remains available.

• + 에이전트 세션에서 pull request를 생성하는 기능을 추가한다 # 에이전트
  원문

  [Agents] Create pull requests from agent sessions: Setting: chat.agentMerge.enabled (optional, for agent merge only) Create pull requests from Agent Host sessions in the Agents window using one form to review and edit generated titles and descriptions, choose draft status, and configure available merge options. Create the pull request directly or send the request to your agent, with your preferred options remembered for next time. Note: The Agent Merge option is experimental and is only available when the setting above is enabled.

• + 다크 및 라이트 테마에 따라 에이전트 창의 채팅 배경을 개별적으로 설정할 수 있게 한다 # UI
  원문

  [Agents] Customize chat backgrounds by color theme (Experimental): Settings: chat.agentSessions.preferredDarkBackgroundImageLayout , chat.agentSessions.preferredLightBackgroundImageLayout (Agents window only) The Agents window can show a decorative chat background behind your sessions, either a pattern of built-in VS Code icons or an image of your own, chosen separately for dark and light color themes. Previously, the image was per theme kind but its layout was not, so right-aligning your dark background and then left-aligning your light one left both of them aligned left. Layout is now stored per theme kind alongside the image, and switching between a dark and a light theme restores that theme's placement. The two new settings replace chat.agentSessions.backgroundImageLayout. Clearing a background also moved. Chat: Set Background... now leads with No Background, which clears the background for

• + Voice Mode에서 병렬 에이전트 작업을 탐색하고 모니터링하며 세션 간 이동이 가능해진다 # 에이전트
  원문

  [Chat] Improved Voice Mode session awareness (Experimental): Navigate and monitor parallel agent work without leaving Voice Mode. Voice Mode can find recent agent sessions, switch between them by label, and report each session's status.

• + 필요할 때 에이전트 SDK를 다운로드하도록 안내를 개선한다 # 에이전트
  원문

  [Agents] On-demand agent SDK downloads: The Claude and Codex agents in the Agents window rely on an SDK that is not shipped with VS Code and is downloaded when you first need it. Previously, the offer to download it appeared only as part of signed-out account setup, so if you were signed in it would download at first message. The offer now appears whenever the SDK is missing for transparency that a download is needed to continue. When models are already available for that agent, the notification presents two options: select Download or send a message to download the SDK as part of the turn. The wording updates in place if models become available while the notification is showing.

• + 완료된 세션을 정리하는 기능을 추가한다 # 에이전트
  원문

  [Agents] Keep completed sessions organized (Preview): Settings: chat.agentSessions.archiveNudge.enabled , chat.agentSessions.autoMarkAsDoneMergedSessionsAfterDays , chat.agentSessions.autoDeleteArchivedMergedSessionsAfterDays , sessions.markAsDoneConfetti (Agents window only) Keep finished work out of the way while preserving the conversation for later. When all of an inactive session's pull requests have merged, the Agents window can suggest marking the session as done. A first-use guide shows you where to find Mark as Done in the sessions list. Enable chat.agentSessions.archiveNudge.enabled to show these suggestions. To automate cleanup, mark inactive sessions as done after their pull requests merge, and optionally delete them after a separate grace period. Both automatic-cleanup settings are disabled by default. When all pull requests for a session are merged, select Configure Automatic Clea

외 2개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 최근 프로젝트를 열 때 Maven 툴 윈도우에 해당 데이터를 채운다 # UI
  원문

  When opening a recent project, the Maven tool window is now populated with the corresponding data.

외 2개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + MCP 서버가 세션 중간에 연결이 끊어지고 자동 재연결이 실패할 때 `/mcp`를 가리키는 알림을 추가한다 # MCP·플러그인
  원문

  [What's changed] Added a notification when an MCP server disconnects mid-session and automatic reconnection gives up, pointing at `/mcp`

• + Claude 앱에서 `claude --remote-control` 또는 `/remote-control`로 시작된 세션을 포크(fork)하는 기능을 추가한다 # 에이전트
  원문

  [What's changed] Added forking a session started with `claude --remote-control` or `/remote-control` from the Claude app; the fork runs as a background session on your computer

• + 긴 세션에서 훅 진행 상황과 서브에이전트 활동이 매 업데이트마다 전체 대화 내용을 다시 처리하지 않도록 개선한다 # 에이전트
  원문

  [What's changed] Improved responsiveness in long sessions: hook progress and sub-agent activity no longer re-process the whole conversation on every update

• + Artifact 도구의 오류 메시지를 개선하여 지원되는 파일 유형을 안내하고 터미널에 한 줄로 표시한다 # MCP·플러그인
  원문

  [What's changed] Improved the Artifact tool's error when a publish includes a file type artifacts don't serve: Claude is told which types are served and what to do instead, and the terminal shows one plain line

• + Artifact 게시 시 연결이 끊기면 중복 버전 생성 대신 안전하게 재전송하도록 개선한다 # MCP·플러그인
  원문

  [What's changed] Improved artifact publishing: a publish whose connection drops after reaching claude.ai is now re-sent safely instead of failing or creating a duplicate version

• + Bedrock, Vertex, Foundry에서 자동 모드 시 기본적으로 로컬 분류기를 사용하도록 변경한다 # 에이전트
  원문

  [What's changed] Changed auto mode on Bedrock, Vertex and Foundry to use the local classifier by default for now; set `CLAUDE_CODE_AUTO_MODE_SERVER=1` to use the platform's server-side classifier

• + Claude 계정 로그인 시 claude.ai 플러그인 접근 권한을 요청하도록 변경한다 # 보안·권한
  원문

  [What's changed] Changed sign-in with a Claude account to also request access to your claude.ai plugins

• + Claude가 요청받지 않아도 관련 공용 채널을 스스로 감시하기 시작한다 # 에이전트
  원문

  [What's changed] [Claude Tag] Changed Claude to start watching related public channels on its own, such as an incident channel a conversation depends on, instead of only when asked

• + Artifact 도구의 페이지 읽기 기능을 개선하여 서비스가 보유한 기능과 데이터베이스 규칙을 명시한다 # MCP·플러그인
  원문

  [What's changed] Improved the Artifact tool's page read to state the capabilities and database rules the artifact service holds for the page, for anyone who can publish to it

• + Artifact 데이터베이스 쓰기 방식을 개선하여 단일 필드 업데이트 시 전체 문서를 다시 쓰지 않도록 한다 # MCP·플러그인
  원문

  [What's changed] Improved artifact database writes: an update can now remove a single field instead of rewriting the whole document

외 54개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + `claude self-hosted-runner --drain-marker-file <path>` 명령어를 추가한다 # 보안·권한
  원문

  [What's changed] Added `claude self-hosted-runner --drain-marker-file <path>`: when that file exists at a SIGTERM drain, the runner reports its exit to the server as a host drain (telemetry only)

• + Bedrock, Vertex AI, Foundry, LLM 게이트웨이 사용자들을 Claude 데스크톱 앱으로 안내하는 스피너 팁을 추가한다 # UI
  원문

  [What's changed] Added a spinner tip pointing Bedrock, Vertex AI, Foundry and LLM gateway users to the Claude desktop app; the claude.ai desktop app tip now suggests `/desktop`, which offers to download the app

• + Artifact 도구의 게시 오류 메시지를 개선하여, 파일이 없는 경우 먼저 파일에 쓰기를 권장하고 지원되지 않는 파일 형식을 먼저 보고한다 # UI
  원문

  [What's changed] Improved Artifact tool publish errors: a publish with no file now says to write the page to a file first, and an unsupported file type is reported before a missing favicon

• + 자동 모드에서 스킬이나 슬래시 명령의 인라인 `!` 셸 명령이 분류기 대신 기본 모드 권한 규칙을 따르도록 변경한다 # MCP·플러그인
  원문

  [What's changed] Changed auto mode so that a skill's or slash command's inline `!` shell commands follow default-mode permission rules instead of the classifier; a command no rule decides runs as a reviewed tool call

• + Claude Code Remote 세션에서 fast mode를 추가한다 # 에이전트
  원문

  [What's changed] Added fast mode in Claude Code Remote sessions (cloud and self-hosted runners): the host's fast-mode setting or `/fast` typed in the session applies where your organization allows it

• + 샌드박스 모드에서 Bash, PowerShell, Monitor에 명령별 `allowed_domains`를 추가한다 # 보안·권한
  원문

  [What's changed] Added per-command `allowed_domains` to Bash, PowerShell and Monitor in auto mode with sandboxing: the hosts a command needs are reviewed with it and opened for it alone; other hosts are refused

• + 에이전트 frontmatter 및 `--agents` JSON에 `omitClaudeMd`를 추가한다
  원문

  [What's changed] Added `omitClaudeMd` to agent frontmatter and `--agents` JSON, letting custom and plugin subagents run without user, project and local CLAUDE.md files; managed policy files still load

• + `claude plugin install` 및 `claude plugin update`에 `--accept-command <sha256>`를 추가한다 # MCP·플러그인
  원문

  [What's changed] Added `--accept-command <sha256>` to `claude plugin install` and `claude plugin update` to accept exactly the command a previous `--json` run displayed, instead of `-y`

• + 터미널 렌더링 성능을 개선하여 대규모 diff 및 긴 트랜스크립트를 더 빠르게 렌더링한다 # UI
  원문

  [What's changed] Improved terminal rendering performance: large diffs and long transcripts render faster, with fewer slow frames

• + 훅 실행 시 스피너에 진행 상황과 경과 시간을 표시하고, SessionStart 훅 대기 중 Esc 키로 프롬프트를 취소할 수 있게 한다 # 훅
  원문

  [What's changed] Improved hook feedback: while a SessionStart, UserPromptSubmit, PreToolUse or SessionEnd hook runs, the spinner says so with elapsed time, and Esc cancels a prompt waiting on a SessionStart hook

외 86개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 플러그인 평가를 위해 `claude plugin eval` 명령어를 추가한다 # MCP·플러그인
  원문

  [What's changed] Added `claude plugin eval`: run a plugin's eval suite against Claude Code and get scored, reproducible results (JSON + HTML report); see `claude plugin eval --help`

• + [VSCode] 에이전트 맵을 추가하여 세션의 서브에이전트 목록과 각 에이전트의 상태를 보여주는 푸터 필을 추가한다 # UI
  원문

  [What's changed] [VSCode] Added an agent map: an "N agents" footer pill opens a map of the session's sub-agents with per-agent cards, Stop agent, and read-only transcripts

• + 관리자 설정에서 GitHub 설치 시 Connect all 또는 Disconnect를 수행하기 전 확인 대화상자를 추가한다 # 보안·권한
  원문

  [What's changed] [Claude Tag] Added a confirmation dialog before Connect all or Disconnect on a GitHub installation in admin settings, to guard against accidental organization-wide changes

• + 원격 제어 및 헤드리스 세션에서 출력 스타일을 목록으로 확인하고 변경할 수 있는 `/output-style` 명령어를 추가한다 # UI
  원문

  [What's changed] Added `/output-style [name]` to list and switch output styles, including over Remote Control and in cloud and other headless sessions

• + Bash 툴이 파일 수정을 수행할 때 변경된 파일의 차이점을 Bash 툴 결과에 포함한다 # 에이전트
  원문

  [What's changed] Added a diff of the files a Bash command changed to the Bash tool result when the Bash tool handles file edits (setting `bashEditDiffEnabled`)

• + 추론 중심의 분산 처리를 위해 Workflow 툴의 실행당 동시 에이전트 제한을 늘리는 `CLAUDE_CODE_WORKFLOW_MAX_CONCURRENT_AGENTS` 환경변수를 추가한다 # 에이전트
  원문

  [What's changed] Added `CLAUDE_CODE_WORKFLOW_MAX_CONCURRENT_AGENTS` (1–256) to raise the Workflow tool's per-run concurrent agent limit for inference-bound fan-outs

• + `/diff` 패널이 로딩 상태를 먼저 보여주지 않고 한 단계로 완전히 렌더링되어 열리도록 개선한다 # UI
  원문

  [What's changed] Improved the `/diff` panel to open fully rendered in one step instead of showing a loading state first

• + Skill 도구의 "Unknown skill" 오류 시, 단일 이름이 정확히 하나의 플러그인 스킬과 일치할 때 해당 플러그인 스킬의 전체 이름을 표시한다 # MCP·플러그인
  원문

  [What's changed] Improved the Skill tool's "Unknown skill" error to name the plugin skill's full name when a bare name matches exactly one plugin skill

• + `/ultrareview --post` 명령이 결과가 도착하면 두 번째 클라우드 세션을 시작하지 않고 직접 PR 코멘트를 게시하고 코멘프트 링크를 출력한다 # MCP·플러그인
  원문

  [What's changed] Changed `/ultrareview --post` to post the PR comment directly when the findings arrive and print the comment link, instead of starting a second cloud session to post it

• + 세션 스크래치패드에 저장되는 artifact 데이터베이스 읽기가 작업 폴더 승인 없이도 중단되지 않도록 변경한다 # 에이전트
  원문

  [What's changed] Changed artifact database reads that save into the session scratchpad so they no longer stop for working-folder approval

외 88개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + `gatewayInternalNetworks` 관리형 설정을 추가하여 관리자가 조직의 공용 IPv4 블록에서 게이트웨이의 `/login`에 접근할 수 있도록 허용한다 # 보안·권한
  원문

  [What's changed] Added the `gatewayInternalNetworks` managed setting, letting administrators allow `/login` to a Claude apps gateway on their organization's own public IPv4 block

• + `claude plugin` 관련 명령어에 `--json` 플래그를 추가하고 `claude plugin list --json`의 각 행에 `errorDetails`와 `noteDetails`를 추가한다 # MCP·플러그인
  원문

  [What's changed] Added `--json` to `claude plugin install`, `uninstall`, `update`, `enable` and `disable`, and `errorDetails`/`noteDetails` to each row of `claude plugin list --json`

• + Claude가 여러 읽기 전용 조회를 동시에 수행하여 응답 속도를 개선한다 # 성능
  원문

  [What's changed] [Claude Tag] Improved reply speed: Claude now runs several read-only lookups (searching Slack, reading a thread, finding people) at once instead of one after another

• + `gateway.yaml`에 `pricing:` 설정이 있으면, 로그인한 Claude Code 클라이언트가 관리형 설정으로 동일한 요율을 받도록 하며 `/cost` 및 텔레메트리가 지출 측정기와 일치하게 된다 # 보안·권한
  원문

  [What's changed] Added to the Claude apps gateway: with `pricing:` set in `gateway.yaml`, signed-in Claude Code clients receive the same rates through managed settings, so `/cost` and telemetry match the spend meter

• + 세션이 종료될 때 `claude self-hosted-runner --remove-session-state` 옵션을 통해 세션별 디렉터리들을 삭제한다 # 에이전트
  원문

  [What's changed] Added `claude self-hosted-runner --remove-session-state` (default off): delete each session's per-session directories under `<base-dir>/_sessions/` when the session ends

• + 발행된 아티팩트의 브라우저 탭 아이콘을 Claude가 페이지에 맞춰 선택하도록 한다 # UI
  원문

  [What's changed] Added browser-tab icons for published artifacts, chosen by Claude to match each page

• + `--continue` / `--resume` 실행 시 대화가 즉시 나타나고 첫 메시지가 전체 기록을 다시 읽지 않도록 개선한다 # 에이전트
  원문

  [What's changed] Improved `--continue` / `--resume`: the conversation appears immediately instead of waiting for SessionStart hooks, and the first message no longer re-reads the whole transcript

• + 도구 사용이 많은 턴에서 도구 배치별 숨겨진 알림을 위해 전체 기록을 다시 그리는 것을 중단하여 응답성을 개선한다 # UI
  원문

  [What's changed] Improved responsiveness during tool-heavy turns by no longer redrawing the transcript for a hidden per-tool-batch reminder

• + 자동 모드 거부 시 Claude가 받는 메시지에 차단된 동작을 막은 규칙을 명시하고, 중단하기 전에 더 안전한 방법과 관련 없는 작업을 먼저 수행하도록 요청한다 # 에이전트
  원문

  [What's changed] Improved auto mode denials: the message Claude receives now names the rule that blocked the action and asks Claude to try a safer method and finish unrelated work before stopping to ask you

• + `/plugin` 명령어로 플러그인을 설치, 활성화 또는 비활성화할 때 메뉴를 닫으면 즉시 적용되며, 이후 `/reload-plugins`가 필요 없게 된다 # MCP·플러그인
  원문

  [What's changed] Improved `/plugin`: installing, enabling or disabling a plugin now takes effect when you close the menu; `/reload-plugins` is no longer needed afterwards

외 86개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Compose Preview에서 불필요한 액션바를 표시한다 # UI
  원문

  Compose Preview: Show redundant action bar in Compose Preview

• + 에디터에서 잘못된 속성을 사용할 때 오류를 표시한다 # UI
  원문

  Layout and Resource Editing: Show an error in the editor when using an incorrect attribute

외 7개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 대규모 작업을 위해 계획을 세우고 서브에이전트에게 작업을 배분하는 Projects 기능을 추가한다 # 에이전트
  원문

  Cursor Projects: Today we're launching Projects in Cursor. Projects lets you take on larger bodies of work, such as a feature, a migration, or a full app. It maintains context over months of work, delegates tasks to thousands of subagents, and performs recurring work without being prompted. Access Projects from the left-hand nav. The coordinator agent in a project doesn't write code itself; it plans the work, delegates it to agents that implement it, and brings the finished work back to you to check. Coordinators create and manage agents on your behalf, running as many in parallel as the work needs.

• + Slack 채널 모니터링이나 정기적 실행 등 외부 신호를 감지하여 자동으로 행동하는 기능을 추가한다 # 에이전트
  원문

  Subscriptions: Tell the coordinator agent to watch a Slack channel, run on a schedule, or follow all your PRs. This way it can take action based on signals it detects, without waiting for your prompt. Connect Slack and point it at a bug-report channel, and it starts delegating each time a bug comes in. Projects are available in beta and rolling out to all users starting today.

• + 클라우드에서 실행되는 Project를 통해 노트북을 닫아도 작업이 계속되도록 한다 # 에이전트
  원문

  Powered by Cloud Agents: A Project runs on its own computer in the cloud, so closing your laptop doesn't stop it. When something needs testing on your machine, the coordinator spins up a local agent to run it there.

• + Project 내에서 공유된 컨텍스트를 통해 에이전트들이 학습한 내용을 누적하고 공유한다 # 에이전트
  원문

  Shared context: You shouldn't have to onboard an agent every time you start a task. Each Project maintains a set of files that sync across every cloud and local machine its agents use. Agents add research and artifacts, along with what they learn about the codebase and how you prefer work to be done. If one agent figures out how to test a service, for example, every future agent can use those instructions. The shared context grows with the Project, making the coordinator more effective over time.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 정기적인 작업을 수행하는 Automations 기능을 추가한다 # 에이전트
  원문

  [Agents] Automations (Preview): Setting: chat.automations.enabled Automations run recurring agent tasks on a schedule, so routine work does not have to be started manually. Start with a template for catching up on changes, triaging issues, or finding bugs, or define your own prompt and schedule. To try automations, enable chat.automations.enabled , open the Agents window, and select Automations in the sidebar. You can run an automation on demand or schedule it to run hourly, daily, or weekly. Learn more about automations in the documentation. Automations is in Preview and is rolling out gradually to all users.

• + 에이전트와 음성으로 대화할 수 있는 Voice Mode를 추가한다 # 에이전트
  원문

  [Chat] Voice Mode (Experimental): Settings: agents.voice.enabled , agents.voice.showTranscript , agents.voice.voice Voice Mode enables you to have a natural, spoken conversation with an agent while it works on your code. Note: Voice Mode is rolling out gradually and might not be available to every eligible account immediately. It requires an eligible individual GitHub Copilot plan and is not available with GitHub Copilot Business or GitHub Copilot Enterprise. Organizations can also turn off Copilot preview features by policy. To try it, enable agents.voice.enabled and select the Voice Mode button in the chat input. While the agent is speaking, start speaking or use the push-to-talk shortcut to interrupt the response and continue the conversation. Voice Mode is aware of your active session and can answer questions about running sessions, the selected model, and attached files. You can also ask

• + GitHub 이슈 및 PR 상세 정보를 Agents window에서 직접 확인하는 기능을 추가한다 # 에이전트
  원문

  [Agents] Open GitHub issues and PR details (Experimental): Setting: extensions.experimental.enableAgentsWindowCapability When a chat conversation references work on GitHub, the Agents window can provide direct integration with the GitHub Pull Requests extension. Select a github.com issue or pull request link to open its details directly in the Agents window, without switching to a browser. This also works when you don't have a workspace for that repository open. To try this initial integration, install the GitHub Pull Requests extension in your default VS Code profile and enable extensions.experimental.enableAgentsWindowCapability .

• + 채팅 입력 시 GitHub 이슈 또는 PR을 컨텍스트로 추가하는 기능을 추가한다 # 에이전트
  원문

  [Agents] Attach GitHub issues and pull requests in any chat: Add a GitHub issue or pull request as context from the Add Context... menu in any chat input, including the Chat view, Chat editor, and Agents window. This makes the issue description, comments, or pull request changes available to the agent without copying them into your prompt. You can also paste a GitHub issue or pull request URL into the new-session input. The URL remains in your prompt and a context attachment is added automatically.

• + Agents window에서 워크스페이스 없이 시작한 quick chat을 워크스페이스 세션으로 전환하는 기능을 추가한다 # 에이전트
  원문

  [Agents] Continue quick chats in a workspace: You can start a quick chat in the Agents window without associating it with a workspace, for example, to discuss general questions or ideas. If the conversation later becomes project-specific, ask the Copilot agent to attach a local folder and continue the same chat. After you confirm the workspace and choose whether to use the folder directly or create an isolated worktree, the chat becomes a workspace session. The session retains its title, conversation history, and current request, and the agent automatically continues with access to the project files when workspace setup finishes. Alternatively, you can start the project work in a new workspace session. Note: Continuing a chat conversation in a workspace session is currently available only in the Copilot harness.

• + 에이전트가 처리 중인 채팅에 메시지를 큐에 추가하여 병렬로 작업하게 하는 기능을 추가한다 # 에이전트
  원문

  [Agents] Agent-queued messages: Keep agents working in parallel without interrupting a chat that is already processing a request. When an agent uses the send_message session-management tool to contact a busy chat, VS Code queues the message and starts it after the active turn completes successfully. An agent can queue multiple messages for chats in the same session or another session. VS Code processes queued messages in the order they were sent, making multi-chat workflows more predictable.

• + 여러 VS Code 창에서 동일한 에이전트 세션을 연결할 수 있는 Agent host를 도입한다 # 에이전트
  원문

  [Agents] Agent host: The agent host lets you connect to the same agent session from multiple VS Code windows. It runs agent harnesses in a dedicated process based on the Agent Host Protocol (AHP). The agent host's Copilot agent is powered by the Copilot SDK, which aligns the agent's behavior and functionality with the Copilot CLI, the standalone GitHub Copilot app, and other Copilot products. We're actively developing the agent host. Learn more in the agent host documentation and our agent host blog post, where we share why we built the agent host, what it enables in VS Code, how the architecture and open protocol work, and workflows you can try yourself. If you have any feedback or requests, please let us know by filing an issue.

• + 일반, 다중 파일, 에이전트 창의 Changes 에디터에서 동일한 방식으로 Smart diff 에디터 레이아웃을 선택할 수 있게 한다 # UI
  원문

  [Code Editing] Smart diff editor layout: Choose a diff layout in the same way across regular diffs, multi-file diffs, and the Agents window Changes editor. Open More Actions (...) > Diff View, and then select Inline, Side by Side, or Automatic. The Automatic option shows which layout is active and adapts as the editor width changes. If you deliberately widen an inline diff by dragging a sash, the diff remains inline while you resize so the content doesn't shift unexpectedly.

• + VS Code pet의 이름을 짓는 이벤트를 진행한다 # 에이전트
  원문

  [Agents] Help name the VS Code pet (Experimental): The experimental VS Code pet is an interactive companion that reacts as you work with agents. Enter /vscode-pet in chat to meet it, then help choose its name. From September 10 through September 17, 2026, submit a name for the VS Code pet. Review the contest terms and conditions.

• + 다중 파일 diff에서 변경된 바이너리 파일을 생략하지 않고 표시하며, Open Diff를 통해 표준 diff 경험으로 확인하도록 한다 # UI
  원문

  [Code Editing] Binary files in multi-file diffs: Changed binary files, such as images, remain visible in multi-file diffs instead of being omitted. The diff shows a Binary file changed placeholder in the file's original position. Select Open Diff to review the file in the standard diff experience, such as an image diff or applicable custom editor. Multi-file diffs in editor windows also use the same visual design as multi-file diffs in the Agents window.

외 1개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + sticky-lines를 사용하여 관련 제어 흐름 요소를 표시한다 # UI
  원문

  PyCharm now shows relevant control flow elements using sticky-lines

• + 파라미터 정보에서 제네릭 바운드(Generic bounds)를 표시한다 # 성능
  원문

  Generic bounds are displayed in parameter info

• + enum auto()에 대한 인레이 힌트를 추가한다 # UI
  원문

  Inlay hints for enum auto()

• + TypedDict 클래스 파라미터와 같은 extra_items를 위한 완성 기능을 추가한다 # 에이전트
  원문

  Completion for TypedDict class parameters like extra_items

외 3개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Settings | Tools | MCP Server | Exposed Tools 페이지의 외관을 개선한다 # UI
  원문

  We've improved the appearance of the Settings | Tools | MCP Server | Exposed Tools page (IJPL-248441).

외 2개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 풀 요청을 완료하기 위해 에이전트가 피드백을 처리하고 충돌을 해결하며 워크플로우를 재실행하는 Agent merge 기능을 추가한다 # 에이전트
  원문

  [Agents] Agent merge (Preview): Setting: chat.agentMerge.enabled Agent merge helps you take a pull request across the finish line. It asks an agent to address review feedback, fix failed checks and merge conflicts, and rerun workflows. Agent merge repeats this process until the pull request is ready to merge. To try agent merge, enable chat.agentMerge.enabled . You can currently enable agent merge for a session only from the Agents window. Run Enable Agent Merge for Active Session or select the Agent Merge button in the title bar. Learn more about using agent merge.

• + 여러 VS Code 창에서 동일한 에이전트 세션에 연결할 수 있는 Agent host를 도입한다 # 에이전트
  원문

  [Agents] Agent host: The agent host lets you connect to the same agent session from multiple VS Code windows. It runs agent harnesses in a dedicated process based on the Agent Host Protocol (AHP). The agent host's Copilot agent is powered by the Copilot SDK, which aligns the agent's behavior and functionality with the Copilot CLI, the standalone GitHub Copilot app, and other Copilot products. We're actively developing the agent host. The following screenshot shows the Copilot harness selected for an agent host in an editor window: Learn more in the agent host documentation and our new agent host blog post, where we share why we built the agent host, what it enables in VS Code, how the architecture and open protocol work, and workflows you can try yourself. If you have any feedback or requests, please let us know by filing an issue.

• + 기업용 정책을 통해 받아쓰기 데이터의 모델 및 언어 모델 전송 방지 제어를 추가한다 # 보안·권한
  원문

  [Chat] Enterprise controls for dictation data: Administrators can manage the dictation model and language-model transcript cleanup through enterprise policies. The new controls make it possible to require on-device transcription and disable language-model cleanup, so dictation remains available while preventing dictation data from being sent to cloud transcription or a Copilot model. Learn more about enterprise controls for dictation data.

• + 편집기 창에서 멀티 루트 워크스페이스를 지원하며, 관련 훅은 단일 폴더에서 로드되도록 설정한다 # 에이전트
  원문

  [Agents] Multi-root workspaces in editor window (Experimental): Settings: chat.agentHost.copilotAgent.multiRootEnabled , chat.agentHost.claudeAgent.multiRootEnabled Copilot and Claude agent sessions in the editor window Chat view support multi-root workspaces. This capability is currently scoped to the editor window. Agent hooks remain scoped to a single workspace folder. If hooks are detected in multiple folders, VS Code prompts you to select the primary folder from which to load them.

• + 새 세션 입력창을 재설계하여 프롬프트, 모델 선택, 워크스페이스 선택 및 기타 세션 제어 항목을 한데 모은다 # 에이전트
  원문

  [Agents] Redesigned new-session input: Start delegated work with less setup in the redesigned new-session input. The updated experience brings the prompt, model selection, workspace selection, and other session controls together in one layout.

• + 에이전트가 절대 경로 및 워크스페이스 URI 외에 프로젝트 이름으로 워크스페이스를 식별하도록 개선한다 # 에이전트
  원문

  [Agents] Improved workspace resolution: Agents can resolve workspaces by their project name in addition to absolute paths and workspace URIs. Session tools also preserve project URIs and all working directories for multi-root workspaces. As a result, you can make requests such as "run this in the vscode workspace" without providing a full path. If multiple workspaces have the same name, the agent reports the possible matches instead of silently choosing one. Remote workspace URIs are supported as well.

• + 에이전트 창에서 관련 채팅과 세션을 계층 구조로 표시하고 관리하기 쉽게 개선한다 # 에이전트
  원문

  [Agents] Navigate related chats and sessions: Keep related agent work organized and move between sessions and chats from the sessions list in the Agents window. Chats appear as children of their parent session, so you can understand which chats belong together without managing a collection of unrelated sessions. Each chat row shows its own title, status, and pending approvals, so you can see which chat needs your input. Expand or collapse the hierarchy, and open, rename, move, or delete individual chats directly from the tree. When an agent delegates independent work to multiple chats, each created chat gets a meaningful title and appears in this hierarchy. The new session or chat is placed close to its source, and the receiving request includes a source link such as Sent by another session or Sent from another chat. Select the link to return to the exact session or chat that initiated it.

• + 에이전트 세션이 사용자 입력을 필요로 하거나 작업이 완료되었을 때 알림을 표시한다 # 에이전트
  원문

  [Agents] Agent session notifications: Settings: chat.notifyWindowOnConfirmation , chat.notifyWindowOnResponseReceived VS Code can notify you when an agent session needs your input or finishes its work. This is especially useful when you delegate work across multiple sessions, workspaces, or VS Code windows. By default, notifications only appear when the VS Code window is not focused. You can configure notifications separately for sessions that need input and sessions that have received a response. Notifications include a direct link back to the relevant session, so selecting one focuses the correct window and opens the session that needs attention.

• + Compact layout density 설정을 통해 에디터 창에 더 많은 콘텐츠를 표시한다 # UI
  원문

  [Editor experience] Layout density for the editor window (Experimental): Settings: workbench.experimental.modernUI , window.density.layout Fit more content in the editor window with the Compact layout density. When workbench.experimental.modernUI is enabled, you can choose between two layout densities: Default layout density is the same as the current editor window layout. Compact layout density removes the spacing between panels and reduces inner panel spacing. This setting is available in the Layout Density section of the Settings menu and can also be set using window.density.layout .

• + 세션 파일의 브레드크럼에 내부 식별자 대신 안정적인 제공자 및 세션 레이블을 사용한다 # 에이전트
  원문

  [Agents] Readable breadcrumbs for session files: Files created in the internal session state directory previously showed internal session identifiers in editor breadcrumbs. Breadcrumbs now use stable provider and session labels, making it easier to identify the file location without exposing implementation details.

외 5개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Markdown의 체크박스가 더 잘 보이도록 대비를 개선한다 # UI
  원문

  Checkboxes in Markdown now have improved contrast for better visibility.

외 3개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + 로컬 네트워크 내에서 도구 실행을 유지하며 코드베이스와 비밀 정보를 내부 머신에 유지하는 self-hosted machines 기능을 추가한다 # 보안·권한
  원문

  Self-hosted machines: Cursor supports **self-hosted machines**, which let you keep tool execution entirely in your own network. Your codebase, build outputs, and secrets all stay on internal machines running in your infrastructure, while the agent handles tool calls locally. Run on menu showing Remote Machines with self-hosted options lambda-test, cloud-demo, and jacks-desktop

• + 동적 풀 스케줄링을 통해 팀 규모에 맞춰 확장 가능한 self-hosted machines 풀을 관리하고 유휴 머신을 절약하며, Cloud Agents 대시보드에서 상태를 확인한다 # 보안·권한
  원문

  Dynamic pool scheduling: **My Machines** connects a single laptop or VM to your account for personal workflows. **Team pools** are named queues of workers for a team or enterprise. Capacity can grow as requests arrive and shrink when workers disconnect, so your self-hosted machines can scale with demand. Pools are not tied to one repository: name the pool, and any available worker can claim the request. Pools can also hibernate idle machines, then restore within a reconnect window when a follow-up arrives, so you don't keep expensive capacity warm just for the next prompt. Cloud Agents dashboard listing Self-hosted Machines pools with active and idle worker counts

• + AWS Lambda, Coder, Cloudflare, Daytona, Modal, Namespace, Vercel, E2B 등 기존 인프라에서 클라우드 에이전트가 실행될 수 있도록 지원한다 # 보안·권한
  원문

  Run on your sandboxes: Cloud agents can now execute on infrastructure you already use, including from AWS Lambda, Coder, Cloudflare, Daytona, Modal, Namespace, Vercel, and E2B.

• + Linux 및 Mac 환경에서 self-hosted 워커가 컴퓨터 사용 기능을 지원하도록 개선한다 # 보안·권한
  원문

  Computer use on Linux and Mac: Self-hosted workers now support computer use on Linux and Mac. With the right desktop packages, an agent can click, type, take screenshots, and drive the browser. You can watch its desktop or take control from Cursor.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Android Studio Quail 4를 사용할 수 있게 된다 # UI
  원문

  Android Studio Quail 4 now available

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Cloud Agents가 시작할 때 GitHub나 다른 SCM 제공자를 연결할 필요가 없도록 변경한다 # 에이전트
  원문

  Start from scratch, without a repo: Cloud Agents no longer require a connected GitHub or other third-party SCM provider to get started. Prompt from the get-go, then save your work to a Cursor Origin repo.

• + repo picker에서 **Start from scratch**를 선택하여 에이전트를 시작할 수 있게 한다 # 에이전트
  원문

  Get started: Select **Start from scratch** in the repo picker, then prompt the agent. In the background, Cursor creates an Origin repo for you. Start from scratch in the repo picker

• + 에이전트의 빌드가 마음에 들 때 **Create repo** 버튼을 눌러 작업 내용을 Origin repo에 저장한다 # 에이전트
  원문

  Turn it into a real repo, whenever you want: Once the agent's build is to your liking, click the **Create repo** button to save your work in an Origin repo. Choose a custom name or pick one of the suggested ones, then set the visibility to private or internal. You'll get a fully scaffolded Origin repo, ready to share or keep building on. Navigate to the Codebase tab to find your repo and access your project.

• + 브라우저에서 클라우드 에이전트의 실시간 미리보기를 제공한다 # UI
  원문

  A live preview, right in the browser: Cursor now port-forwards your cloud agent's live environment straight to your browser, so you can preview it and use tools like design mode.

• + Vercel 계정을 연결하여 빌드한 결과물에 대한 실시간 URL을 생성한다 # MCP·플러그인
  원문

  Publish your work: Connect a Vercel account and hit publish to get a live URL for what you built. A Vercel account is required to use the publish feature. Get started today.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Agent host를 통해 여러 VS Code 창에서 동일한 에이전트 세션에 연결할 수 있게 한다 # 에이전트
  원문

  [Agents] Agent host: The agent host lets you connect to the same agent session from multiple VS Code windows. It runs agent harnesses in a dedicated process based on the Agent Host Protocol (AHP). The agent host's Copilot agent is powered by the Copilot SDK, which aligns the agent's behavior and functionality with the Copilot CLI, the standalone GitHub Copilot app, and other Copilot products. We're actively developing the agent host. The following screenshot shows the Copilot harness selected for an agent host in an editor window: Learn more from our VS Code Agent Host documentation and the video below. If you have any feedback or requests, please let us know by filing an issue. See it in action in our Agent Host introduction YouTube video.

• + 다른 애플리케이션에서 생성한 Copilot 또는 Claude 에이전트 세션이 Sessions 리스트에 표시되도록 지원한다 # 에이전트
  원문

  [Agents] Continue external agent sessions in VS Code: Setting: chat.agentSessions.showExternal The Sessions list in VS Code can now show recent Copilot or Claude agent sessions that you created in other applications. By default, VS Code shows up to two recently updated external sessions. Select a session from the Sessions list to view the conversation and continue it in VS Code with your Copilot subscription. When you open an external session, a banner at the top of the chat lets you configure how many external sessions appear in the Sessions list. You can also use the External submenu in the Sessions list filter to choose which external sessions are shown. Change this preference at any time with the chat.agentSessions.showExternal setting.

• + 에이전트의 작업에 대해 보완적인 모델로부터 의견을 얻을 수 있는 Rubber Duck 기능을 추가한다 # 에이전트
  원문

  [Agents] Rubber Duck (Experimental): Rubber Duck is an experimental feature that allows you to get a second opinion from a complementary model on the agent's work. It helps surface missed details or edge cases. You can use Rubber Duck by invoking the /rubber-duck command in a Copilot agent host session. Learn more about Rubber Duck in GitHub Copilot CLI.

• + Agents 창에서 single-pane side layout을 기본값으로 설정하고 레이아웃을 개선한다 # UI
  원문

  [Agents] Single-pane side layout is now the default: Setting: sessions.layout.singlePaneDetailPanel In the previous release, we introduced the single-pane layout. In this layout, session details and editors are located in a single side pane, with a shared tab bar next to chat. The single-pane layout is now enabled by default for the Agents window on desktop. This release also improves the layout: Diffs use a side-by-side view when space permits and switch to an inline view when the side pane becomes too narrow. Use Always Show Inline Diff from the editor title menu to keep diffs inline at every width. The action bar is less crowded. Editor-specific actions for diffs, view modes, code review, and attachments move to the editor title area, while the shared header focuses on showing or hiding Details. To use the classic layout, disable sessions.layout.singlePaneDetailPanel and reload the window.

• + 세션 헤더를 간소화하고 세션 정보를 채팅 입력창 바로 위에 배치하여 가독성을 높인다 # UI
  원문

  [Agents] Simplified session controls and information: The session header is less crowded, so you can identify the active session more easily and focus on the conversation. The session title has a prominent position, while an overflow menu next to the title groups actions for creating a chat and pinning the session. Search remains available in the Sessions list. When a session contains multiple chats, chat tabs replace the single-chat header. Session information moves directly above the chat input, where it is easier to find while you work. Pills can show changes, pull requests, issues, browsers the agent is interacting with, and artifacts from the session. For example, the Changes pill shows live file and diff counts and opens the complete set of session changes. Right-click an individual pill to open a context menu and choose which pill types are visible. The Changes pill remains visible whene

• + 긴 응답을 검토할 때 현재 프롬프트를 계속 볼 수 있게 하는 채팅용 Editor-style sticky scroll을 추가한다 # UI
  원문

  [Chat] Editor-style sticky scroll for chat (Experimental): Settings: chat.stickyScroll.enabled , chat.experimental.stickyScroll.enabled Chat sticky scroll lets you keep the current prompt visible as you scroll through and review long responses. We've further refined the behavior to make it more consistent with sticky scroll in the editor. Enable both settings to try the redesigned experience.

• + 채팅 응답 하단에 모델별로 사용된 입력, 캐시된 입력, 출력 토큰 수를 상세히 표시한다 # 성능
  원문

  [Chat] View detailed chat turn usage: To give you better insight into your chat usage, we've redesigned the chat response footer. When you hover over it, the footer shows a per-model breakdown of the input, cached input, and output tokens used in that chat turn.

외 1개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.

• + Android Studio Quail 3 Patch 1에서 Kotlin 파일에 포함된 Compose Preview 어노테이션이 있는 경우 Code/Split/Design 탭이 사라지는 문제를 해결하고 기능을 개선한다 # UI
  원문

  Preview: [Compose Preview] Code/Split/Design tabs missing in Kotlin files with @Preview annotation in Android Studio Quail 3 Patch 1

외 3개 항목은 원문에서 볼 수 있습니다.

AI가 만든 요약입니다. 원문과 다르면 오류 제보해 주세요.